A rigid standard-card holder with a stated thickness class
I would choose this when a regular card needs a rigid holder and the 30/35-point specification matches the card. The useful buying checks are thickness and delivered quantity; the 3×4 label alone answers neither completely.
Choose it if
You need rigid holders for regular-thickness individual cards.
Look elsewhere if
You are storing thicker cards without measuring them, or want a shuffle-ready deck.
The buying facts
| Holder format | 3 × 4 inches |
|---|---|
| Card thickness | 30/35 point standard for regular cards, per maker |
| Packaging | 25 holders per pack; 1,000 per direct-sale case |
| Reference item | 10122 |
Will it fit?
Manufacturer-statedThe 3 × 4 measurement identifies the holder format, not a supported 3 × 4 inch card. Cardboard Gold lists a 30/35-point class and separately documents its standard soft sleeves for these regular top loaders.
Check the inner layer separately
I would put the card in a suitable soft collector sleeve before moving it into a holder, and check the fit without force. A playing sleeve is not automatically interchangeable with the maker’s soft sleeve.
The holder remains open at the top. A rigid wall is not a sealed transport package, and it does not establish waterproofing or a guarantee against surface damage.
Four small packs or a large case?
At 25 holders per pack, 100 individual cards need four packs. The direct manufacturer listing sells a 1,000-holder case, equivalent to forty packs. Retail bundles may have a different count or include soft sleeves, so verify their contents independently.
What to compare it with
BCW 3×4 Topload Card Holder — Standard 25ct
Compare BCW’s separate interior, exterior, and thickness specifications.
Cardboard Gold Card Saver I
Choose a semi-rigid approach when that handling format better suits the job.
Sources & verification
- Cardboard Gold 3×4 Top-Loader — Standard — manufacturer specifications — Manufacturer documentation. Verified 2026-09-26.